---
title: "1- Introduction to nic teaming and its types"
description: "**In short:** **NIC Teaming** combines several network cards (or ports) in a server so they act as one: total bandwidth adds up (three 1 Gbps cards = 3 Gbps) and the connection stays up if one card fails. Common modes…"
url: "https://www.hyyat.com/en/knowledgebase/1-introduction-to-nic-teaming-and-its-types/"
updated: "2026-10-21"
category: Server management / servers without control panel
tags:
  - centos 7
---

# 1- Introduction to nic teaming and its types

**In short:** **NIC Teaming** combines several network cards (or ports) in a server so they act as one: total bandwidth adds up (three 1 Gbps cards = 3 Gbps) and the connection stays up if one card fails. Common modes include round-robin, active-backup and LACP.

**1- Introduction to nic teaming and its types**

In short, the idea is that if there is more than one network card on the server, or a card that contains more than one port

They can be used with this feature by merging them and appearing as one card

Consolidating or aggregating network links to provide a logical link with higher throughput, or to provide redundancy, is known by many names, e.g. channel bridging, Ethernet tethering, port aggregation, channel aggregation, NIC aggregation, or link aggregation. This concept as it was originally implemented in the Linux kernel is widely referred to as threading. The term Network Teaming was chosen to refer to this new implementation of the concept. The existing tethering driver is not affected, Network Teaming is offered as a replacement and does not replace tethering in Red Hat Enterprise Linux 7

 

[ Nic teaming](https://en.wikipedia.org/wiki/Link_aggregation)

## The benefit of this feature

1- Combine the speeds that will pass for each card. If one card is 1 GB and there are 3 network cards, the internal capacity of the device will be 3 GB

2- In the event of a problem with one of the cards or the port, the connection to the network will continue because the other two cards will continue to work

[![1-مقدمه عن Nic teaming وانواعه](https://www.hyyat.com/wp-content/uploads/2019/01/Nic-teaming1.png)](https://www.hyyat.com/en/)

** **

## **Methods for merging cards (json configuration)**

### **1-****round robin**

It sends a package from the first card and then sends the second package from the second card

Thus (he distributes lode evenly on the cards)

 

[![1-مقدمه عن Nic teaming وانواعه](https://www.hyyat.com/wp-content/uploads/2019/01/round-robin.png)](https://www.hyyat.com/en/)

### **2-****active backup**

It sends traffic via one card only, and when it stops, it sends via the second card

And when it stops, it sends through the third card

 

[![1-مقدمه عن Nic teaming وانواعه](https://www.hyyat.com/wp-content/uploads/2019/01/active-backup.png)](https://www.hyyat.com/en/)

### **3-****lacp****(****broadcast****)**

And it must be specified for switch that it will work with this lacp protocol

Its benefit is that it collects the ports and sends the traffic once from all the ports

(You get the sum of the cards) or send on all the cards

 

[![1- Introduction to nic teaming and its types - screenshot 1](https://www.hyyat.com/wp-content/uploads/2019/01/broadcast.png)](https://www.hyyat.com/en/)

**Note: the switch must support lacp**

### 4- load balance

It runs 2 switches and sends traffic from the first and second switch

Any division by them is working with a normal switch (stand alone)

 

[![1- Introduction to nic teaming and its types - screenshot 2](https://www.hyyat.com/wp-content/uploads/2019/01/load-balance.png)](https://www.hyyat.com/en/)

**Explanation 1- Introduction to Nic teaming and its types has been completed**

Next lesson

[**2- How to configure nic teaming**](https://www.hyyat.com/en/knowledgebase/2-how-to-configure-nic-teaming/)

[**Greetings from the Hyyat Host team**](https://www.hyyat.com/en/)

**Related service:** [server management](https://www.hyyat.com/%d8%a5%d8%af%d8%a7%d8%b1%d8%a9-%d8%a7%d9%84%d8%b3%d9%8a%d8%b1%d9%81%d8%b1%d8%a7%d8%aa/) from Hyyat Host, with technical support that replies within 24 hours.

 **Related guides**

- [How to Connect to a Server via SSH from Windows, Mac and Linux](https://www.hyyat.com/knowledgebase/%d8%b4%d8%b1%d8%ad-%d8%a7%d9%84%d8%a7%d8%aa%d8%b5%d8%a7%d9%84-%d8%b9%d9%86-%d8%a8%d8%b9%d8%af-%d8%a8%d8%a7%d9%84%d8%b3%d9%8a%d8%b1%d9%81%d8%b1-%d8%b9%d9%86-%d8%b7%d8%b1%d9%8a%d9%82-ssh/)
- [2- How to configure nic teaming](https://www.hyyat.com/knowledgebase/2-%d8%b7%d8%b1%d9%8a%d9%82%d9%87-%d8%b9%d9%85%d9%84-configuration-nic-teaming/)
- [How to Write an IPv6 Address: Format and Shortening Rules](https://www.hyyat.com/knowledgebase/%d9%85%d8%a7%d9%87%d9%8a-%d8%b7%d8%b1%d9%8a%d9%82%d9%87-%d9%83%d8%aa%d8%a7%d8%a8%d9%87-ipv6-%d8%9f/)

  **Need this service from Hyyat Host?**Our team handles it for you, with support replying to tickets within 24 hours at most.[Web Hosting](https://www.hyyat.com/en/hosting/)[Saudi Hosting](https://www.hyyat.com/en/saudi-hosting/)
