Access with SAMBA/CIFS

You can mount your Storage Box via Samba/CIFS. You can use the following UNC path.

If you are using your main account, the share name is backup.

If you are using a sub-account, you must use the username of the sub-account as the username and share name.

Linux/Unix:

//<username>.your-storagebox.de/<share_name>

Windows

\\<username>.your-storagebox.de\<share_name>

#

Instructions #

Linux

:In Linux-based systems, you can use the following command on the CLI to mount the file system

mount.cifs -o user=<username>,pass=<password> //<username>.your-storagebox.de/backup /PATH/FOLDER

By adding the following line to /etc/fstab, your system will automatically mount the file system at boot. (It is a single line!):

//<username>.your-storagebox.de/backup /mnt/backup-server cifs iocharset=utf8,rw,credentials=/etc/backup-credentials.txt,uid=<system account>,gid=<system group>,file_mode=0660,dir_mode=0770 0 0

 

The file /etc/backup-credentials.txt (mode 0600) should contain two lines as follows:

username=<username>
password=<password>

In Debian-based distributions, the command is provided via the package cifs-utils.

apt-get install cifs-utils

On Debian Wheezy based systems, edit the parameters as follows if you are having problems:

rsize=65536,wsize=130048

You should also add the following lines to /etc/rc.local:

modprobe cifs
echo 0 > /proc/fs/cifs/OplockEnabled

FreeBSD

On FreeBSD, you can mount the Storage Box as follows:

Add the following line to /etc/fstab:

//<username>/backup /mnt/storagebox smbfs rw,-N,-I=<username>.your-storagebox.de,-U=<username> 0       0

Replace <username> with the Robot-assigned username. Also you need to use mkdir /mnt/storagebox to create the local directory if it does not already exist.

Add the following lines to /etc/nsmb.conf:

[<username>]
charsets=UTF8:UTF8
[<username>:<username>]
password=$crypt-string

Create the crypt-string with smbutil crypt.

Windows

In Windows, use the following instructions to connect your Storage Box as a network drive with its own drive letter:

  1. Open Windows Explorer.
  2. Windows 7: On the left, click on Computer and then at the top on Map network drive.
    Windows 8/10: On the left, click on This PC. And then at the top click on Computer and then on Map network drive.
  3. In the new dialog, select a network drive letter of your choice and enter \\<username>.your-storagebox.de\backup for the folder. Enter a check next to Reconnect at login if you want to automatically establish a connection upon starting the system.
  4. When you are asked for login information here, you should enter the username and password you used for your Storage Box. Or as an alternative, you can save the login information in Windows.
  5. The setup of your Storage Box as a network drive should now be finished and you should be able to find it as a separate drive under This PC (Windows 8.1/10) or Computer (Windows 7/8).

 

Error with files larger than 4 GB #

If there are errors when copying files that are 4 GB or larger, then it can help to deactivate caching. To do

-o cache=none so, you need to mount the Storage Box with the extra parameter

Encrypt SAMBA connection #

To encrypt a SAMBA connection, add the following option to your mount command: seal

Example:

mount.cifs -o seal,user=<username>,pass=<password> //<username>.your-storagebox.de/backup /PATH/FOLDER

This feature is only available in newer Linux versions (e.g. starting with Ubuntu 18.04).

All rights reserved to Hayat Host 2022

blank